Before you choose a fabric, it helps to know roughly how much the job takes. List the pieces, say whether the fabric is plain or patterned and whether the cushions are loose, and the calculator adds up the metres of 140 cm upholstery fabric. It is the same rule the quote form on every Reupholstery.co.za page uses.
How the metres are worked out
Each piece starts from a rough figure for plain fabric on a 140 cm roll: a 3-seater couch about 12 m, a 2-seater about 8.5 m, a corner couch about 18 m, an armchair about 6 m, a wingback about 5.5 m, a recliner about 7 m, an ottoman about 2 m, a dining chair seat pad about 0.5 m, a dining chair seat and back about 1 m, a bar stool seat about 0.4 m, an office chair about 0.8 m, and headboards 1.5 m (single or three-quarter), 2.5 m (double or queen) and 3 m (king). Booths are about 2 m and pew cushions about 0.6 m per metre of bench.
A small pattern adds 10% and a large pattern or stripe 20%, because the repeat has to line up across the seat, back and arms. Loose seat cushions add 10% on couches and chairs, and loose seat and back cushions 20%. The total is rounded up to the next half metre.
Before you buy the fabric
- Let the upholsterer measure. Arms, skirts, piping, buttons and the way the old cover was cut all change the figure. Buy only once the workshop has given you a number.
- Check the roll width. Most upholstery fabric is about 140 cm wide; some is 280 cm, which cuts differently.
- Buy it all from one batch. Colour can shift between rolls, so order the full amount at once.
- Ask about customer's own material. Some workshops charge extra handling when you supply the fabric. See upholstery fabric and couch reupholstery.