Foam suppliers sell full sheets and cut to size, often while you wait. Enter the size and number of each cushion and the calculator gives the total volume, how many pieces fit on a full sheet of about 2,290 x 1,880 mm, how many sheets to allow and which kind of foam suits the use.
How the sheets are worked out
A full foam sheet is about 2,290 x 1,880 mm, sold in thicknesses from 6 mm up to 150 mm. For each size the calculator lays the pieces out one way round, fills the leftover strip with pieces turned the other way, tries the opposite layout too and keeps the better one. Pieces of different sizes but the same thickness can often share one sheet, so the sheet total is an upper limit. A little is lost to the blade, and very tight layouts may need an extra sheet.
Volume is length x width x thickness x how many. It helps when a supplier prices foam by the cubic metre or by the block.
Choosing the foam
- Seats: ask for a seat-grade density, often high resilience (HR) foam. Higher density usually lasts longer before it flattens.
- Backs and scatter cushions: a softer back foam or a fibre inner.
- Outdoor, pool and boat cushions: open-cell quick-dry (reticulated) foam that drains, under an outdoor fabric or marine vinyl.
- Firm bases and benches: chip foam (bonded reconstituted foam), often with a softer layer on top.
- Wrap it: polyester fibre wrap over the foam helps the cover fill out. See upholstery foam and outdoor cushions.
As a published guide, checked November 2026: a full high-density sheet is roughly R550 at 25 mm, R1,100 at 50 mm and R2,400 or more at 125 mm.